Viewers iD14 MkII: what’s it?
Id audio interface Extremely regarded by the viewers. Providing a extra audiophile expertise than their compact EVO designs, the iD14 and its smaller brother (iD4) have simply been given a mk2 improve.
For the iD14, this implies higher dynamic vary, higher signal-to-noise ratio, extra connectivity, and higher headphone output. Additionally importantly, the iD14 has been completely bus powered (its predecessor used an exterior PSU).
To attain this and have higher efficiency, the iD14 requires a USB 3.0 connection as it will probably present extra energy. The unit could use a USB 2.0 connection, however it’s not formally supported and can possible be unstable in use.
The iD14 has the most recent USB-C sort port and could be linked to and powered by the most recent USB-C geared up iPad Professional. For older iOS gadgets you will want a digital camera connection package and a PSU.
Viewers iD14 MkII: Efficiency and Verdict
iD14 is a 10-in 6-out, 24-bit 96kHz interface. It has two rear-mounted mic/line inputs, a front-mounted instrument enter (though that is shared with mic/line enter 1), and two pairs of balanced outputs. So, with the additional pair of outputs, it represents an enchancment over its predecessor.
As earlier than, there may be an optical digital enter for stereo S/PDIF or 8-channel ADAT, and this will increase the variety of inputs to 10. Along with instrument inputs, the entrance edge contains 1/4″ and 1/8″ headphones. The outputs every present a uniform feed and can be utilized on the similar time.
On the highest panel with two enter achieve, you will have the person phantom energy switches after which to the precise of the output meter, you will have the massive push button quantity encoder and three buttons – loudspeaker, ID and headphones. By deciding on their respective buttons, you may set completely different ranges for headphones and loudspeakers, and the iD button turns the amount knob into encoder mode so you need to use it to navigate plugins.
Just like the MK1, the ID button can also be linked to the Viewers’s ID Software program app. It presents an entire load of further performance together with minimal latency monitoring, dim degree, enter polarity, monitor trim and that is the place you may set up these enter and output streams as wanted.
By way of mics you may create a grasp mic, two separate cue mics (benefiting from that additional output pair), and even assign one enter as a talkback supply. It’s extremely versatile and is among the higher techniques I’ve come throughout for interface administration.
The iD14 makes use of Viewers’s established 8024 Class A preamp design and delivers 58dB of achieve in addition to 10dB of digital achieve out there by means of the iD app. Sonically the preamps are clear and clear, precisely what you’d need from an interface mic pre. That being mentioned, the JFET instrument enter is extra colourful and sounds simply high quality when performed or clipped. It is also price saying that the improved headphone amp is satisfyingly loud and dynamic.
All advised, the iD14 mk2 is a wonderful improve that is a greater unit than its predecessor. At £200, it’s moderately priced but in addition solely £60 dearer than the iD4. Given the additional options included, if you happen to can spring the additional £60, the iD14 is unquestionably the one.
MusicRadar Verdict: A nicely geared up, good worth interface. The MK2 undoubtedly improves its audiophile capabilities and is extra versatile with USB powering,
Viewers iD14 MkII: The Net Says
“The Viewers ID14 MkII packs an actual punch for an interface at this value level. Nice sounding microphone and instrument inputs, a clear monitor path and a great deal of expandability choices all put this interface in a weight class above its small footprint “
very quiet (opens in new tab)
Viewers iD14 MkII: Palms-on Demo
Viewers iD14 MkII: Specs
- Class mic preface
- 1 JFET mains enter
- Mains Enter Achieve Vary: 40dB
- Mic Prelude Benefits: 58dB
- Primary Output Dynamic Vary: 125.5dB-A
- Headphone Output Dynamic Vary: 125.5dB-A
- Energy: Minimal 0.9mA @ 5V (USB 3.0)
- Form: 173(W) x 120(D) x 62(Max H) mm
- weight: 0.77 kg
- CONTACT AJAY: viewers (opens in new tab)